- Advanced Interconnect Technologies
- 2.5 & 3D Heterogeneous Integration
- System in Package (SiP)
- Wafer Bumping & WLP
- Multi-Chip Modules (MCMs)
- Novel Microfabrication & MEMS
- Design, Packaging & Assembly
- Assembly Services
- Final Test
- Chip on Board (CoB)
- Plastic Packaging (BGA/CSP/QFN)
- Hermetic Packaging
- MIL-STD-1553 Data Bus Couplers & Accessories
- Micro In-Line Couplers
- Tab Mounted In-Line Couplers
- Through Hole Mounted In-Line Couplers
- Box Couplers
- Custom Design Couplers
- Data Bus Coupling Transformers
- Data Bus Relays
- Data Bus Harnesses
- Bus and Stub Terminators
- Wide Bandwidth RF & Video Transformers
- Antenna Couplers
- Video Isolation Transformers
- RF Wideband Transformers
- RF Wideband Transformers & Impedance Adapters
- Excellent power efficiency
- EMI input filter
- Input under voltage protection
- Output overload protection and ON/OFF sequencing
- Isolated ON/OFF pulse command interface
- Output overload protection and ON/OFF sequencing
- Radiation Hardened to 100 kRad and 60 MeV cm2 / mg
- Various telemetries
Products
We deliver a range of standard platforms based on a general design philosophy which can be tailored to the customer’s program requirements. Fully customized designs are also supported. All models and variants are supplied with full data analysis package. Request Custom Design with your specific power conversion needs.
| Model | O/P | Power | Size (mm) LxWxH | Mass | Product Brief |
|---|---|---|---|---|---|
| MLN | 2 | 5W | 50 x 60 x 17 | < 45g | |
| MAS | 3 | 15W | 85 x 50.8 x 18 | < 72g | |
| MAHB | 4 | 20W | 85 x 71 x 19.5 | < 95g |  |
| MBH | 3 | 30W | 105 x 68.5 x 19 | < 115g | |
| EAL | 4 | 75W | 142 x 80 x 21.1 | < 200g | |
| EARB | 3 | 130W | 155 x 65 x 22.5 | < 250g | |
| EARC | 3 | 170W | 155 x 84 x 25 | < 285g | |
| EART | 3 | 150W | 155 x 84 x 25 | < 285g | |
| EGB | 3 | 190W | 153 x 95 x 25 | < 300g | |
| EGBL | 3 | 120W | 155x70x23.5 | < 250g | |
| EGBN | 3 | 70W | 124.2x84.7x23.6 | < 225g | |
| EADP | 4 | 160W | 171.5 x 80 x 21.1 | < 400g | |
| EANR | 2 | 115W | 155x75x25 | < 250g | |
| EBS | 1 | 350W | 190 x 90.5 x 28.5 (Board) 227 x 29 x 101.5 (Chassis) |
< 470g (Board) < 890g (in Chassis) |
|
| ZB | 1 | 250W | 100 x 140 x 25.4 | < 350g | |
| ZAR | 2 | 140W | 157.3 x 125.3 x 19 (Board) 161.9 x 20.6 x 131.1 (Chassis) |
< 475g (Board) < 700g (in Chassis) |
|
| ZBR | 1 | 250W | 157.3 x 125.3 x 19 (Board) 161.9 x 20.6 x 131.1 (Chassis) |
< 475g (Board) < 700g (in Chassis) |
|
| ZAC | 1 | 325W | 100 x 254 x 24.6 (Board) 100 x 254 x 26 (incl. Tray) |
< 640g (Board) < 830g (incl. Tray) |
|
| TPSU | 4 | 400W | 180 x 120 x 25 | < 520g | |
Zxxx Series (180-325W)
- Single Output
- High Output Current (to 60A)
- Low Output Voltage (to1V)
- Remote Sense
- High Efficiency
- Cold Redundancy
- Complete Unit in Chassis (ZXR)
TPSU Series (300-400W)
- Up to 4 Outputs incl. 2 main outputs
- Pulsed Radar (SAR) Applications
- Continuous Wave Applications
- GaN based RF amplifiers
- High efficiency
Mxxx Series (5-25W)
- Up to 4 Outputs
- Linear Post Regulators, All O/P
- Low Noise, High CS Rejection
- Output Sequencing
- Low Power RF, LNA, MRO, etc.
- Isolated Pulse Command I/F
- EMI Input Filter
Exxx Series (75-210W)
- Up to 4 Outputs
- High Efficient Main Output(s)
- Linear Post Regulators, All O/P
- Output Sequencing
- RF Amplifiers (Tx) GaAs and GaN
- Isolated Pulse Command I/F
- EMI Input Filter
EBx Series (200-350W)
- Single Output
- Complete Unit (Chassis)
- For Hot Redundant Systems
- Isolated Bus Converter (~28 Volt)
- Parallel Operation (Current Sharing
Custom PCB Power Solutions
Fully customized designs supporting your program specific requirements. All models and variants are supplied with full data analysis package.
Rad-Hard PCB Based DC-DC Converters
Tailored to match our customers' specifications and include all functions and features needed to interface directly to all major satellite platforms
View Products